Amer Networks SD8n Betriebsanweisung PDF herunterladen (Seite 22)

CONNECTING THE SWITCH

This chapter describes how to connect the Switch to

your Fast Ethernet network. In each of the following

figures, the 8-port 10/100M NWay Fast Ethernet

Switch is shown.

PC to Switch

A PC can be connected to the Switch via a two-pair

Category 3, 4, 5 UTP/STP straight cable (Cat.5 must

be used for 100Mbps). The PC (equipped with a RJ-45

10/100Mbps phone jack) should be connected to any of

the 8 ports (1x - 8x) of the 8-port Switch.

The LED indicators for the PC connection are

dependent on the LAN card capabilities. If LED

indicators are not lit after making a proper connection,

check the PC LAN card, the cable, the Switch

conditions and connections.

The following are LED indicator possibilities for a PC

to Switch connection:

1. The 100LINK/ACT, 10LINK/ACT LED

indicator lights green for hookup to 100Mbps

speed or lights amber for hookup to 10Mbps

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Keine Kommentare

Amer Networks SD8n Betriebsanweisung Seite 22